Projectors are common in modern home plans because everyone wants a theater-like experience in their home.
Gone are the days when projectors are used in business meetings, or we can see them only in church for blessings.
These days many houses have a home theatre setup where the projectors are also necessary to place due to restrictions of going out to watch a movie.
But in older houses, many people still dislike drilling their walls, mainly when living in a rented apartment.
So, to overcome this problem, they are always looking for a guide on how to mount a projector without drilling?
Yes! People have been searching for ways to mount a projector without drilling the walls or roofs on the internet.
After a lot of research and experimentation, we have come up with a few ideas and a solution for you to set up your projection system without drilling any holes in the wall.
How to Mount a Projector without Drilling?
Today some projectors don’t come with a mounting system which also becomes a challenging task to select the right projector that supports mounting.
Also, selecting the right place to mount the device without damaging the property is another major task.
So, you should know other ways to mount a projector without drilling where you live.
Nobody likes a small screen experience at home while consuming their favorite web series or movies during a pandemic.
Everyone wants a movie experience and wants to enjoy a setup like an IMAX without paying for the movie theater.
Using Suction Cup Mounts
You might have seen those movies of James Bond where he climbs the walls using cupped equipment; that is called suction.
Air suction is a part of vacuum technology used in the industry for multiple purposes.
Some pick up fragile material without breaking or lifting an object without hand smudges.
The same technology can be used to custom-build a projector boom with a suction end to mount the projector without drilling.
The best part about this method is that it can be used on any mounting assistance or on a stand.
From this, your creativity based on your space or location of mount would serve you the best.
Using Strong Adhesive (Temporary Solution)
The below method we recommend when you are looking for a temporary solution for mounting your projector for a few hours.
“Apply this solution on your risk we at Projectors Place will not be liable for your losses.”
You might have heard about the double tape, which you generally use to hang articles on the walls.
If you have not heard about it, it is a tape with adhesive on both sides. So that one side can be used to stick onto the wall, and the other can be used to attach the items.
In the same way, you can use it to mount projectors without drilling, but the tape, as mentioned above, in particular, cannot be used.
Every tape has a weight limit that it can handle based on the unit’s weight you want to hang.
If you exceed the load, the unit will fall since heavy projectors require commercial adhesive tape or patches that can handle the projector’s weight.
The branding package of the patch or tape will have the weight limit mentioned in it.
If you wonder how reliable the glue mechanism is, then even metal glues are available in the industry, which are used to fix two metal pieces together.
So yes, they are reliable to use.
Using Projector Stands [Recommended Method]
If wall or roof mounting is not mandatory for you, this is the best option. You will find height-adjustable projector stands like tripods and mic pods in the stores.
This stand can be used to place projectors at the required heights. It will take up a little space off your floor in the venue, but no holes in the walls are required.
Depending on the projector type and weight, you may have to invest in a quality tripod or stand, as you should not be risking an expensive projector over saving a few bucks.
The placement of the stand should be done in the right way. It should not face any human tackles while placing the projector on it.
Using a Table as a Mount
Table mounts and racks are pretty standard in the modern interior designing world.
Every home these days has a modular kitchen or television multimedia rack with adjustable rack sizes and reconfigurable shelves.
One can use even the empty shelves of the showcase or TV rack to mount the projector if that’s available.
If you still don’t have a showcase, a table is enough as you can get the mountable shelves and racks from the stores. The stand can then be used to place the projector.
Utilizing the pre-Established Props
In your home, find out if there are any pre-established hooks or if any extra mounts are available or not.
For example, when we build our home or you are living in an apartment, we always put ceiling fan hooks in two to 3 places.
But sometimes, due to some reason, we hook the fan on a single ceiling.
So, in this case, we can use these extra hooks to mount a projector without drilling any extra holes in our living place.
Can I Also Mount The Projector Screen Without Drilling Hole?
Yes, you can mount the screen also without drilling a single hole with the help of a projector screen stand, hanging strips, and adhesive hooks.
How do I temporarily hang my projector?
You can temporarily hang the projector with adhesive tapes, hooks, and various hangers to make it fixed for some time.
Depending on your area and space, you can use any method mentioned above.
The method I have discussed with you is tried and tested and will help you mount a projector without drilling.
Or, who knows, if none of these was brought up to use for you, it might inspire you to come up with your DIY mounting method.